Uncategorized

Printing on Windows – Attaching to a network printer in Psychological Sciences

Adding a Printer on Windows

STEPS on Windows 7:

  • Add the LPR Feature for Printing:

(1A) You will need to be logged in as an Administrator:

(1B) From the “Start” button -> Choose Control Panel -> Programs and Features and on the lefthand side, click “turn Windows features on or off

(1C) Under “Print and Document Services” see if the  “LPD Printer Service” is checked. If it is not, click the check box and hit OK.

  • From the “Start” button -> Choose Control Panel -> Devices and Printers -> Choose “Add a printer” located in the top column

  • From the wizard that opens choose “Local Printer“. Then choose “create a port“.

  • Choose LPR port from the pulldown menu.
  • On the following page, fill in these fields : server= “psyprint.psy.uconn.edu“, printer= “printer190c” This should build the printer.
  • Then install the printer driver. Manufacturer= HP, Printer= “HP Laserjet Enterprise 600 m601 m602 m603
  • Also turn Duplex= on, and Tray 3= 500 page sheet option.
  • Print a test page to ensure it works.

STEPS on Windows 10:

  1. From the “Start” button -> Choose Control Panel -> Programs and Features
    There is a need to turn Features on or off. An admin account is required.
  2. Under “Print and Document Services” choose “LPD Printer Service” and hit OK.
  3. From the “Start” button -> Choose Control Panel -> Devices and Printers -> Choose “Add a printer”
  4. From the wizard that opens choose “Local Printer”. Then choose “create a port”.
  5. Choose LPR port from the pulldown menu.
  6. On the following page, fill in these fields : server=”psyprint.psy.uconn.edu”, printer=”printer190c”
  7. This should build the printer.
  8. Then install the printer driver. Manufacturer=HP, Printer = “HP Laserjet Enterprise 600 m601 m602 m603”
  9. Also turn duplex=on, and tray 3=500 page sheet option.
  10. Print a test page to ensure it works.

Bousfield Room 161 Projector Use FAQ’s

Q: How do I turn on the projector?

A: Upon entering the classroom, there is a touch screen display remote where you can access the projector’s base controls and display sources along the wall of the blackboard.


Q: How do I connect my laptop?

A: There are two connection types available to use: HDMI and VGA. If your laptop supports a DVI connection there is a VGA to DVI adapter. It is recommended to use HDMI as this will yield the best picture quality. Make sure that the right source is selected on the touch screen display remote.

Q: Sound isn’t outputting on the speakers, what do I do?

A: If you are connecting your laptop via VGA/DVI make sure that the audio cable is also plugged into the headphone jack. Then make sure that the volume on the laptop is up and that the volume on the touch screen display remote is up. If this doesn’t solve the problem follow these steps:

(1) Minimize all applications

(2) Reconnect aux cord, a system message will pop up

(3) Select “Headphones”

(4) Test sound (Be wary of volume)

After adjusting this, it is recommended to use the touch screen display remote when controlling sound output in order to keep devices synced. You can change the volume using the touch screen display by pressing and holding the designated arrow.

Q: Can I borrow a Mac adapter to connect to my laptop?

A: The main computer, wireless keyboard and mouse found at the podium should satisfy most of the functions of a personal computer. You can display the main computer by switching to PC as the selected display. If you can’t transfer information, feel free to ask the Administrative Staff in the Front Office for their equipment sign out sheet.

Q: Why won’t my laptop connect to the wifi?

A: The University of Connecticut offers two wireless connection sources: UCONN-GUEST and UCONN-SECURE. If you are connected to guest, make sure that you accept the popup window that comes up when you try to connect or you won’t be able to use the web. For UCONN-SECURE make sure that you are signing in with your netID and password. 

Feel free to use the BLUE wired connection if your WiFi problems persist.

Bousfield Seminar 162 Projector Uses

Support and Service

Q: How can I raise/descend the projection screen in the classroom?

A: The podium at the front of the classroom is where you will find the bulk of your resources. Along the wall next to the podium you’ll notice buttons resembling a light switch which acts as a remote for the projection screen.

 

Q: How do I turn on the projector?

A: At the podium you’ll notice an electronic switcher for the different input connections which is also used to power on/off the projector. To turn it on simply press the button labeled PROJ ON. Be sure to turn it off when you’re all done using it by pressing PROJ OFF and logging out of the main computer. You’ll know that it’s been activated when the button lights up after being pressed.

 

Q: Why is the page I have displayed on my laptop not being displayed on the projector?

A: This is probably because the external display has not yet been activated. The projector is capable of most connections including HDMI and VGA but in order to activate the external display you need to press the corresponding button on the podium. If using the main computer for your presentation then just hit the button labeled PC.

 

Q: I plugged in the auxiliary cord connected to the VGA but why isn’t the sound playing on the overhead speakers?

A:   (1) Minimize all applications

       (2) Reconnect aux cord, a system message will pop up

       (3) Select “Headphones”

       (4) Test sound (Be wary of volume)

 

Q: The volume knob is all the way up but the sound is still too low, can it go any louder?

A: Try increasing the volume on your connected device or on the PC by clicking the speaker icon found in the bottom right corner.

 

Q: Can I borrow a Mac adapter to connect to my laptop?

A: The main computer, wireless keyboard and mouse found at the podium should satisfy most of the functions of a personal computer. You can display the main computer by switching to PC as the selected display. If you can’t transfer information, feel free to ask the Administrative Staff in the Front Office for their equipment sign out sheet.

 

Q: I would like to step away from the podium during my presentation, but I don’t like going back and forth to the front of the classroom to change slides.

A: As an alternative, you can connect your personal computer to the display wires found at the center of the roundtable. To activate this external display source select the button labeled FLOOR BOX at the podium.

 

Q: After I plugged in my laptop, the wireless mouse and keyboard are no longer responding.

A: Once an external display source is activated, the connected device now becomes the main source for that display. The wireless mouse and keyboard are connected to the main computer and can be used for the PC display. To use multiple displays make sure they are all fully connected and you will be able to change inputs through the buttons on the podium.

LAN School

LAN SCHOOL TUTORIALS

  
Introduction to Lan School (Pella Schools)
https://www.youtube.com/watch?v=yvFHrugeVwI
  
Navigating the Teacher Console (Lenovo)
https://www.youtube.com/watch?v=BIa3SJ1kkCI
  
Show Teacher’s Screen (Lenovo)
https://www.youtube.com/watch?v=t-U-ztKswwE&feature=youtu.be
  
Teacher Demonstration (C. Tondreau)
https://www.youtube.com/watch?v=5dBFCFvRQEk
  
Remote Control (Lenovo)
https://www.youtube.com/watch?v=BUEirEz3nGI
  
Show a Student Screen (Lenovo)
https://www.youtube.com/watch?v=JPCeoFPAtXY&list=PLadwjZCyTsTWY_PW-gSZzABcIyik6YrIi&index=8
  
Messaging (Lenovo)
https://www.youtube.com/watch?v=jg_nqwz-liA&index=12&list=PLadwjZCyTsTWY_PW-gSZzABcIyik6YrIi